Close

Hot-water boilers operating with solid fuel

These are used for heating systems of residential, public and industrial buildings, for heating greenhouses and facilities being similar in planning to the latters. Installation can be performed in both separated and built-in boiler rooms.
 
Manufactured in accordance with *ТУ 2822-002-20891797-2008
Евразийское соответствие

25 years on market

Technical specifications

Design type:
Fire-tube, three-way, with natural draft
ITEM CAPACITY SOLID FUEL CONSUMPTION INTERIOR DIAMETER CHIMNEY INTERNAL DIAMETER OF FLUE DUCT DIMENSIONS BOILER’S EFFICIENCY WEIGHT NOT MORE THAN
            LENGTH WIDTH HEIGHT    
  Ths. Kcal kW Kg/h at Qnp=4,800 kcal/kg mm mm mm mm mm % kg
KWr-10KB(T) 9 10 2,3 125 35,9 703 488 874 75-80 140
KWr-15KB(T) 13 15 3,5 150 35,9 703 469 1128 75-80 200
KWr-20KB(T) 17,5 20 4,6 150 35,9 748 568 1174 75-80 233
KWr-30KB(T) 25,8 30 7 152 35,9 790 618 1214 75-80 265
KWr-40KB(T) 34,4 40 9,2 152 35,9 866 638 1214 75-80 340
KWr-50KB(T) 43 50 11,5 194 41 880 728 1350 75-80 465
KWr-70KB(T) 60,2 70 16,2 194 41 1050 748 1350 75-80 555
The boilers weight is specified for a working pressure of 3 kgf/cm². In the case of ordering boilers with a working pressure of > 3 kgf/cm², the weight of boilers in creases respectively
Technical specifications from 100 to 700 kw with a lime yard. the furnace, flue ducts and lime yard are manufactured in a single metalcase.

Design type: Fire-tube, tent-shaped, with three-way gas flow
ITEM CAPACITY SOLID FUEL CONSUMPTION INTERIOR DIAMETER CHIMNEY INTERNAL DIAMETER OF FLUE DUCT DIMENSIONS BOILER’S EFFICIENCY WEIGHT NOT MORE THAN
            Длина Ширина Высота    
  Тыс. Ккал/ч кВт кг/ч при Qnp = 4800 ккал/кг mm mm mm mm mm % кг
КВр – 100КБ(Т) 86 100 23 220 67,5 2120 1050 1942 75-80 1475
КВр – 160КБ(Т) 137,6 160 37 300 67,5 2450 1125 2152 75-80 2020
КВр – 250КБ(Т) 215 250 55 360 105 2776 1376 2302 75-80 2935
КВр – 300КБ(Т) 256 300 69 360 105 2926 1375 2302 72-77 3090
КВр – 400КБ(Т) 345 400 92 400 105 3338 1457 2302 70-74 3855
КВр – 500КБ(Т) 430 500 115 600 105 3321 1600 2738 70-74 5025
КВр – 600КБ(Т) 516 600 138 600 105 3621 1600 2738 70-74 5500
КВр – 700КБ(Т) 602 700 161 600 105 3921 1600 2738 70-74 6047
The boilers weight is specified for a working pressure of 3 kgf/cm². In the case of ordering boilers with a working pressure of > 3 kgf/cm², the weight of boilers in creases respectively
Technical specifications from 100 to 700 kw without a lime yard. the furnace and flue ducts are manufactured in a single metal case, and the lime yard is made of bricks at the place of mounting.

Design type: Fire-tube, three-way, with natural draft
ITEM CAPACITY SOLID FUEL CONSUMPTION INTERIOR DIAMETER CHIMNEY INTERNAL DIAMETER OF FLUE DUCT DIMENSIONS BOILER’S EFFICIENCY WEIGHT NOT MORE THAN
            Длина Ширина Высота    
  Тыс. Ккал/ч кВт кг/ч при Qnp = 4800 ккал/кг mm mm mm mm mm % кг
КВр – 100КБ(Т) 86 100 23 220 67,5 2120 1050 1542 75-80 1390
КВр – 160КБ(Т) 137,6 160 37 300 67,5 2450 1125 1702 75-80 1800
КВр – 250КБ(Т) 215 250 55 360 105 2776 1376 1852 75-80 2650
КВр – 300КБ(Т) 256 300 69 360 105 2926 1375 1852 72-77 2800
КВр – 400КБ(Т) 345 400 92 400 105 3338 1457 1852 70-74 3500
КВр – 500КБ(Т) 430 500 115 600 105 3321 1600 2310 70-74 4700
КВр – 600КБ(Т) 516 600 138 600 105 3621 1600 2310 70-74 5200
КВр – 700КБ(Т) 602 700 161 600 105 3921 1600 2310 70-74 5700
The boilers weight is specified for a working pressure of 3 kgf/cm². In the case of ordering boilers with a working pressure of > 3 kgf/cm², the weight of boilers in creases respectively.

Under the supervision of the experts from sweden the company implemented the quality management system in compliance with iso: 9001/14001.

Advantages

Full thermo isolation of boiler

High efficiency 76-80%

Economy of 300 kW/h
because of absence of exhauster

Easy to install and maintain

Supplied with all requirements
and ready for exploitation

Easy Installation because
of piping and fasteners.

Universal spare parts with
ability to buy in internal markets

How do we make high quality product?

Welding column for longitudinal and circumferential seams

Hydraulic 4 roll bending machine

Plasma-arc cutting machine

Orbital welding column for pipes

Fill the form and we will contact you as soon as possible